Method note

Why our YouTube RPM differs from other calculators

YouTube publishes no per-view rate, and published RPM averages disagree with each other. Here is where our number sits, and why.

The short answer

YouTube publishes no per-view rate, so every calculator is estimating. Ours is $3.50 per 1,000 views at the typical setting, which sits inside the $2 to $4 band that most all-niche averages report, above the one measured median we found (about $2.30) and below the figures guides give for US-heavy audiences. We lowered it from $6.50 on 3 November 2026 after comparing these sources. Audience country still matters a great deal, and your own YouTube Studio RPM should replace ours as soon as you have one.

Sources reviewed 3 November 2026. Third-party figures are quoted as reported and have not been independently verified. The sources disagree with each other, mainly about audience mix.

What published sources say

SourceRPM per 1,000 views (long-form)BasisLink
AIR Media-Tech study, as reported by SozeeMedian about $2.30 across nichesReported as YouTube Analytics data from 300 channelssozee.ai
VloggingPro$1 – $5; all-niche average $2 – $4Guide with niche tablesvloggingpro.com
TT Calculator$2 – $4Estimate in a TikTok guidettcalculator.net
YT CalculatorsAverage $1.50 – $4.00Guide with niche and country tablesytcalculators.com
ToolbilGlobal $3 – $5; US creators $5 – $8Guide, stated as US-heavy audiencestoolbil.com
Fluxnote (USA guide)US creators about $5 – $8Guide for US audiencesfluxnote.io
Views-to-Money$1.5 – $8 (typical $3.5)Editorial scenario, not a measured averageYouTube Money Calculator

Averages differ because audiences differ: global figures include lower-paying countries, US-focused guides do not. We found one study reporting measured data, a median near $2.30. Everything else is a guide or estimate.

Reason 1: we model RPM, not CPM

YouTube defines CPM as the cost per 1,000 ad impressions before its revenue share, and RPM as your revenue per 1,000 views after the share, across all views. Creators receive 55% of net ad revenue on long-form videos, and not every view plays an ad, so a CPM calculator needs two extra assumptions that many leave hidden. Approximately, RPM = CPM × monetized share × 55%:

CPM40% monetized50%60%70%
$5$1.10$1.38$1.65$1.93
$10$2.20$2.75$3.30$3.85
$20$4.40$5.50$6.60$7.70

A $10 CPM can therefore be a $2.20 to $3.85 RPM. If a calculator turns a CPM into earnings without stating the monetized share, its number can look much higher or lower than an RPM-based one.

Reason 2: audience country moves the number most

Our default, Global / mixed, is a multiplier of ×1, which gives $3.5, inside the $2 to $4 band most guides report for all niches. Picking countries changes that:

Audience countryMultiplierTypical RPM
United States×1.5$5.25
United Kingdom×1.3$4.55
Canada×1.25$4.38
Australia×1.35$4.73
Germany×1.2$4.20
United Arab Emirates×1.1$3.85
India×0.10$0.35
Pakistan×0.08$0.28
Philippines×0.09$0.32
Brazil×0.25$0.88

Update, 14 November 2026: we lowered the India, Pakistan, Philippines and Brazil factors to ×0.10, ×0.08, ×0.09 and ×0.25 after comparing them with three outside sources. The reasoning is in our guide to earnings in Pakistan, India and the Philippines.

Two US-focused guides report about $5 to $8 for US creators, so our US scenario ($5.25) sits at the bottom of that range. Our Pakistan scenario ($0.28) is below the measured median of about $2.30, so treat it as the cautious end. These multipliers are editorial scenario inputs, not YouTube rates.

Reason 3: our niche spread is narrower than published ranges

Published guides show finance paying several times what gaming pays: VloggingPro lists finance at $6 to $20 and gaming at $0.50 to $2.50; Toolbil lists $12 to $35 and $1.50 to $5.50. Our multipliers keep the spread to about 1.9×, from ×0.82 (gaming) to ×1.55 (finance):

NicheMultiplierTypical RPM
Finance×1.55$5.42
Business×1.4$4.90
Technology×1.28$4.48
Education×1.12$3.92
Health & Fitness×1.18$4.13
Beauty×1$3.50
Travel×0.95$3.32
Food×0.9$3.15
Gaming×0.82$2.87
Entertainment×0.78$2.73

That puts us below the published finance figures and inside or just above the published gaming ranges. If you work in an extreme niche, your own Studio RPM will beat any table.

Reason 4: what counts as a view

RPM is revenue per 1,000 views, so the count you divide by matters. Since YouTube changed how public views are counted on 24 August 2026, the public number can sit above the engaged number that revenue is based on. Read our guide to views versus engaged views, and use engaged views in the calculator when you have them.

What we leave out, and how to use your own number

The calculator models long-form ad revenue only. Shorts use a different pool, and sponsorships are priced separately. We also have no independent measured sample for this exact unit: the range is an editorial planning assumption. On 3 November 2026 we lowered it from $2.50, $6.50 and $12 to $1.50, $3.50 and $8 after comparing the sources above. The next review is due 3 February 2027.

To use your own number, open YouTube Studio, go to Analytics, then Revenue, and read your RPM for the period and the countries you care about. Type it into the typical rate field and set low and high a little either side.

Open the YouTube Money Calculator

Frequently asked questions

Why is your YouTube number different from other calculators?

Published figures differ mostly by audience. Guides quote all-niche averages of $2 to $4 per 1,000 views, the one study we found that reports measured data gives a median near $2.30, and US-focused guides say $5 to $8. Our typical scenario is $3.50 for a mixed audience, and it moves with the country you choose: $5.25 for a US audience and $0.28 for a Pakistan audience.

What is the difference between RPM and CPM?

CPM is what advertisers pay per 1,000 ad impressions, before YouTube’s share. RPM is your revenue per 1,000 views after YouTube’s share and across all views, including ones with no ad. This site models RPM, because it is the number you see in YouTube Studio.

Which number should I use if my audience is global?

Pick the audience country or countries that match your analytics, and treat the low and typical scenarios as the realistic range. Replace the rate with your own Studio RPM as soon as you have it.

Does your calculator include Shorts, memberships or sponsorships?

No. It models long-form ad revenue. Shorts have their own calculator, and sponsorships are priced separately. YouTube’s own RPM metric can bundle other revenue sources, so check which are included in your report.

Help us check these numbers

If you have your own earnings figures, you can compare one month with our scenarios and, if you choose, send it anonymously on the Share your RPM page. It is one input to our scheduled reviews, not a promise that any figure will change.

Primary references

YouTube Help: YouTube Partner earnings overview

Official · revenue shares and monetization modules

Open source →
YouTube Help: understand ad revenue analytics

Official · RPM and CPM definitions

Open source →

Averages and ranges in the table above are secondary sources, linked where quoted.